URETHANE / EPOXY MORTARS SYSTEMS

CF-124 TURBO-BOND THIS UNIQUE FORMULATION WAS DEVELOPED FOR APPLICATIONS IN COLD STORAGE AREAS OR FREEZE ROOMS WHERE MOST EPOXIES WILL NOT CURE. BECAUSE OF THE EXTREMELY LOW TEMPERATURE. CF-124 EPOXY MORTAR WILL CURE BELOW FREEZING AND ADHERE TO A DAMP SUBSTRATES IN 4-6 HOURS ALSO  & IS USDA APPROVED. CF-124 HAS ZERO VOC'S. COLORS: LIGHT & DARK GRAY, RED, BLACK & CLEAR   COVERAGE: 50 SQ. FT. @ 1/4'' SOLD IN A 2 AND 5 GALLON KITS

CF-126 DURA-FLOOR THIS FAST SETTING EPOXY IS READY FOR TRAFFIC IN 1 TO 2 HOURS. ONCE CURED DURA-FLOOR A TOUGH DURABLE SURFACE ABLE TOO WITHSTAND THERMAL DURA-FLOOR THIS FAST SETTING EPOXY IS READY FOR TRAFFIC IN 1 TO 2 HOURS.WHEN CURED IT OFFER A DURABLE SURFACE ABLE TOO WITHSTAND THERMAL SHOCK AND IMPACT AND WITH EXCELLENT ABRASION RESISTANT. CF-126 HAS ZERO VOC'S AND IS USDA APPROVED. COMPRESSIVE STRENGTH.  COLORS: LIGHT &  DARK GRAY,BLACK & CLEAR COVERAGE: 50 SQ FT @ 1/4''    SOLD IN 2 AND 5 GALLON KITS

CF-205 EPOXI-FLOR IS A PREMIUM GRADE EPOXY MORTAR DESIGNED FOR AREAS THAT ARE SUBJECT TO HEAVY ABRASION WEAR & THERMAL SHOCK. EPOXI-FLOR RESISTANT MILD ACIDS,CAUSTICS AND VARIETY OF SOLVENT  COMPRESSIVE STRENGTH: 12,000 PSI   COLORS: LIGHT & DARK GRAY, RED, BLACK AND CLEAR   SOLD IN 2 & 5 GALLON KITS

CF-206 COAL TAR EPOXY IS RECOMMENDED FOR PATCHING INDOOR OR OUTDOOR APPROVED AREAS. CF-206 COAL TAR  EPOXY IS RECOMMENDED FOR PATCHING BOTH INDOOR OR OUTDOOR ASPHALT AREAS AND CF-206 HAS NO VOC'S AND  DOES NOT REQUIRE FLOOR PRIMER. COMPRESSIVE STRENGTH:6,509 PSI     COVERAGE: 50 SQ FT @ 1/4' COLOR:BLACK SOLD IN 5 GL KITS
                                                                                                                             

CF-212 POLAR-POXI HAS ZERO VOC'S AND IS DESIGNED FOR APPLICATION WHERE THE TEMPERATURE ARE MINUS 10 DEGREES RECOMMENDED FOR COOL STORAGE AREAS, FREEZER OR GENERAL OUTDOOR PATCHING IN THE WINTER.READY TRAFFIC IN 1 / 2 HOURS COLOR: NATURAL CLEAR ONLY COMPRESSIVE STRENGTH: 11,000 PSI   COVERAGE: 23 SQ. FT. @ 1/4'' SOLD I 2 AND 5 GALLON KITS

                                    URETHANE MORTARS SYSTEMS

CF-244 SPEED-SET IS A TWO COMPONENT URETHANE HYBIRD FLOOR PATCH THAT IS A GREAT CHOICE WHEN QUICK REPAIR REPAIRS ARE NEEDED. LIGHT FOOT TRAFFIC IN 10 / 20 MINUTES. HEAVY TRAFFIC IN 1 HOUR. SPEED-SET IS ALSO CHEMICAL RESISTANCE & WORKS DOWN TO -20 DEGREES. COLOR: GRAY/MIXED   COVERAGE: 4 SQ FT FOR THE 1 GALLON KIT AND 8 SQ FT ON 2 GALLON KIT   COMPRESSIVE STRENGTH: 4,400 PSI

CF-900 POLY-CRETE THIS WATER BASE URETHANE MORTAR SYSTEMS HAS OUTSTANDING WEAR PERFORMANCE AND CAN WITHSTAND HIGH HEAT EXPOSURES. POLY-CRETE IS EXTREMELY RESISTANCE TOO THERMAL SHOCK AND IS A GOOD CHOICE FOR HOT WATER WASHING DOWN AREAS. COLOR: GRAY,RED,TAN    COMPRESSION STRENGTH: 8,600 PSI

COVERAGE: 9 SQ FT FOR THE SMALL KIT AND 18 SQ FT ON THE LARGE KIT

                                                      SLURRY FLOOR TOPPING SYSTEMS

CF-205 SL  IS A 100 EPOXY POURABLE PRODUCTS DESIGNED FOR REPAIRING CRACKS IN CONCRETE AREA OR TOO LEVEL SPALLED FLOORS TOO LIKE NEW CONDITION. COVERAGE:  40 SQ FT @ 1/8''  COLORS: LIGHT AND DARK GRAY, BLACK, RED AND CLEAR COMPRESSIVE STRENGTH: 1,2000 PSI

CF-210 AQUA BOND SLURRY WAS DESIGNED FOR AREAS WHERE A DURABLE SHOCK RESISTANT SURFACE IS NEEDED. LIKE THE URETHANE MORTARS THIS PRODUCT HAS EXCELLENT THERMAL SHOCK CAPABILITIES & IS A GOOD CHOICE WHERE REPEATED HOT WATER WASHING IS NECESSARY. CF-210 IS FORMULATE NEGLIGIBLE VOC'S AND IS MOISTURE INSENSITIVE PLUS CAN WITHSTAND UP TO 300 DEGREES OF DRY HEAT. COLORS: GRAY, RED,TAN   COMPRESSIVE STRENGTH: 6,400 PSI  

SOLD IN 5 GALLON KITS COVERAGE: 45 SQ FT @ 1/8'' THERMAL SHOCK IS 400 PSI    

                                                              MISCELLANEOUS PRODUCTS    

CF-162 EPOXY FLOOR PRIMER HAS ZERO VOC'S AND IS DESIGNED FOR  USE AS THE BASE COAT WHEN RESURFACING CONCRETE AREAS WITH ANY OF THE EPOXY MORTARS.COVERAGE: 162-267 SQ FEET @ 6-10 MILS  SOLD IN A 3 GALLON KIT

CF-820 (OIL STOP) IS A TWO COMPONENT SOLVENT BASE EPOXY COATING FOR OVER PETROLEUM BASE OIL CONTAMINATED CONCRETE FLOOR AREAS. COVERAGE: 200-320 FT FEET @ 5-8 MILS WET  SOLD IN A 2 GALLON KIT

CF-698 IS A VERTICAL AND OVERHEAD EPOXY CRACK REPAIR MORTAR FILLER THAT IS A THREE COMPONENT 100% SOLIDS EPOXY MORTAR. IT'S RECOMMENDED FOR TANKS,WALLS AND CURB'S PATCHING OR FORMING. CF-698 IS FORMULATED WITH ZERO VOC'S AND CURED IN 30/40 MINUTES      COMPRESSIVE STRENGTH:10,375 PSI    SOLD IN 2 AND 5 GALLON KITS